DETROIT DIESEL |
Call 410.317.4628 Option 4 for a quote today. |
Our Engine Rebuilding shop has over 50 years combined experience servicing and rebuilding Detroit Diesel Marine Engines including both 2-cycle, DDEC, and 4-cycle models. We provide pickup and delivery service to any East Coast or Gulf Coast location.
Fixed-Price Remanufacturing |
Worried your rebuild cost will balloon into a second mortgage? Timbolier takes the guess-work out of repowering by offering fixed-price rebuilds to suit your needs and budget. We clearly spell out what parts/service are included,... and what's not. Don't settle for a rebuild that leaves critical components unattended. Our REMANUFACTURING service is a COMPLETE TEARDOWN and re-assembly of your engine, servicing all wear components. Complete Detroit Diesel REMANs start at $15,950 for 671 Turbo models. Call us for a quote that will make you smile!
Gold Rebuild Service |
6v92T now only $ 29,750 |
- Complete engine tear-down
- Engine block: Tank and magnaflux
- Engine Block: Align hone cylinders if necessary.
- Engine Block: Resurface deck if required.
- Cylinders: Installation of all new cylinder liners, pistons, rings, and liner seals.
- Precision check of liner deck height and replacement of liner insert shims.
- Heads: Hot Tank and magnaflux; resurface as needed; Replace if casting damaged/unusable
- Heads: All new valves, seals, cam followers, injector cups; pressure test to ensure proper seal of combustion chamber. Guides, seats, and springs replaced if worn out of spec.
- Replace injector crossover tubes
- Replace rocker assembly components if worn.
- Injectors: Rebuild all injectors, volume test, and match
- Rack adjustment (valve lash and injector timing)
- Crankshaft: Magnaflux crankshaft ; grind if required; Reinstall with new bearings and seals
- Replace harmonic balancer
- Connecting Rods: Magnaflux and replace if unserviceable
- Inspect PTO Assembly and repair any damaged/worn components
- Replace Coolant pump
- New thermostats
- New cooling system hoses
- Cooling System pressure test
- Replace all belts
- Replace Fuel Pump
- Rebuild Blower & bypass valves
- Replace Cam bearings
- Regrind Camshaft if worn out of spec
- Heat Exchanger: Clean, acid bath, and pressure test
- Oil Cooler: Clean and pressure test
- Aftercooler: Clean and pressure test
- Rebuild Governor
- Rebuild Oil Pump
- Turbo replacement priced separately if required
- Paint with high-temp engine enamel
- Replace all stopcocks with bronze
- New oil filter and fuel filter
- Fill with break-in oil
- Fill with engine coolant
- Test run with dynamometer and take readings.
- Six month Full Parts and Labor Warranty on all serviced components.
Platinum Rebuild Service |
6V92T now only $ 34,750 |
- All parts and services provided in the GOLD Service, plus:
- Complete tear-down of engine. Every internal and external component removed and individually cleaned, primed, and painted.
- Rebuild Governor.
- Engine Block: Tank and magnaflux block. Align hone cylinders if necessary. Resurface deck if required.
- Inspect power take-off drive assembly and service as needed.
- Camshaft Service: Replace Cam bearings and regrind camshaft if needed. Replace all cam followers.
- Replace external seawater tubes with Stainless Steel.
- Acid bath or rod clean and pressure test heat exchanger, oil cooler, fuel cooler, gear cooler, intercooler or aftercooler.
- Test and rebuild alternator, starter, and raw water pump as needed.
- Re-Assemble with new oil and fuel lines.
- Paint with 2-part epoxy Awlgrip with color change if desired
- New Temperature, Oil pressure and Fuel pressure sending units. New Temp and Oil pressure alarm switches.
- Six months parts/labor warranty.
Proudly powered by Weebly